FAQ’S

Frequently Ask Questions About Air Barrier Testing in Oregon

What is air barrier testing, and why is it important in Oregon?
Air barrier testing ensures that your building is properly sealed to prevent air leaks that can lead to energy loss, moisture issues, and poor indoor air quality. In Oregon, with its diverse climate and energy efficiency requirements, air barrier testing is critical to ensuring compliance with local building codes and state energy regulations, helping to create more sustainable and efficient buildings.
During air barrier testing, a specialized blower door system is used to either pressurize or depressurize the building. This helps identify leaks and weaknesses in the air barrier system by measuring how much air escapes or enters the building. The results allow for targeted remediation of problem areas, ensuring that the air barrier system performs as intended.
Yes, Oregon has specific building code requirements that often include air barrier testing, especially for larger buildings or those seeking energy-efficient certification. Testing ensures that a building meets the performance standards for energy efficiency, moisture control, and overall comfort. It’s essential to check local regulations for the specific requirements in your area.
The main benefits of air barrier testing include improved energy efficiency, reduced heating and cooling costs, better moisture management, and enhanced indoor air quality. Proper air barrier systems also help prevent drafts and water intrusion, leading to a more comfortable and durable building. Additionally, air barrier testing ensures compliance with energy codes, potentially qualifying your project for certifications.
To prepare for air barrier testing, make sure your building is fully enclosed, with windows, doors, and other openings properly installed. It’s also important to ensure that all mechanical systems, such as HVAC, are functioning and that any potential obstructions are cleared. Working with an experienced testing agency like QED LAB ensures that the process runs smoothly and efficiently, meeting all local code requirements.

Frequently Asked Questions About Window Testing in Oregon

What are the benefits of window testing in Oregon?
Window testing in Oregon ensures that windows perform well under the state’s diverse and challenging weather conditions. It helps verify that windows meet energy efficiency standards, resist water penetration, and withstand the effects of wind and temperature fluctuations. Testing provides peace of mind for homeowners, builders, and architects by ensuring that windows will contribute to the overall durability and comfort of the building.
Window testing is required to ensure that windows meet Oregon’s stringent building codes and energy efficiency standards. Testing helps prevent issues such as drafts, water leaks, and poor insulation, ensuring that windows perform optimally in the state’s varied climate conditions.
Window testing includes several key tests, such as air infiltration (how much air leaks through the window), water penetration (how well the window resists water leaks), and structural integrity (how well the window holds up under stress). These tests confirm that windows can handle the region’s weather and provide lasting durability.
Window testing is essential for builders, architects, and manufacturers involved in new construction or renovations in Oregon. It ensures that the windows used comply with state and local building codes and meet performance standards for energy efficiency, safety, and durability.
For homeowners, window testing offers several benefits, including improved energy efficiency, better comfort, and protection from water damage. By ensuring windows are tested and meet the required performance standards, homeowners can save on heating and cooling costs, avoid costly repairs, and enjoy long-lasting, durable windows.

Frequently Ask Questions About Laboratory Testing in Oregon

What does laboratory testing involve in Oregon?
Laboratory testing in Oregon involves assessing the performance, durability, and compliance of materials or products under controlled conditions. This testing simulates real-world factors such as air and water infiltration, structural integrity, and energy efficiency to ensure products meet regulatory standards and perform as intended in diverse environmental conditions.
Laboratory testing is essential for verifying that products meet Oregon’s building codes and energy efficiency standards. It helps manufacturers, architects, and builders ensure that their products are safe, durable, and energy-efficient, which is particularly important in Oregon’s diverse climate, ranging from coastal rain to inland temperatures.
In Oregon, laboratory testing is commonly used for a wide range of building products, including windows, doors, air barriers, insulation, and structural components. These products are tested for various performance factors such as energy efficiency, air and water resistance, and overall durability to meet both state and local building requirements.
Manufacturers, architects, engineers, and construction professionals in Oregon often need laboratory testing to ensure their products or designs comply with building codes and regulations. Whether you’re developing new products, working on a construction project, or troubleshooting an issue, laboratory testing provides the reliable data necessary for decision-making.
Laboratory testing provides accurate, independent, and objective data that ensures your product or building system will perform as expected. By testing materials before they are used in construction, you can avoid costly mistakes, meet regulatory requirements, and improve the overall quality and energy efficiency of your project.

Frequently Asked Questions About Field Testing in Oregon

What is field testing and why is it important in Oregon?
Field testing involves evaluating the performance of building components, such as windows, doors, and air barriers, directly on-site in real-world conditions. In Oregon, field testing is crucial because it helps ensure that products meet local building codes and regulations while withstanding the state’s climate. Field testing allows for accurate performance assessments under actual environmental conditions, ensuring long-term reliability and safety.
In Oregon, field testing includes assessments such as air infiltration, water penetration, and structural performance testing. These tests are essential for ensuring that building systems, like windows and doors, provide energy efficiency, weather resistance, and durability. Field tests also help identify potential issues, such as leaks or structural weaknesses, that may not be apparent until the building is exposed to environmental conditions.
Field testing is essential for a variety of professionals in Oregon, including builders, contractors, architects, and building owners. It ensures that newly constructed or renovated buildings meet performance standards and code requirements. Additionally, field testing can be valuable for troubleshooting issues in existing structures, verifying the integrity of building components, and ensuring compliance with energy efficiency standards.
Field testing provides reliable, real-world data that helps you identify and address issues early in the project, preventing costly delays and repairs. By ensuring that your building components meet performance standards, you can avoid future problems such as leaks, drafts, or structural failures. Field testing in Oregon helps you stay on track with local building codes, ensures compliance with energy efficiency regulations, and ultimately contributes to the long-term success of your project.
QED LAB is one of the few FGIA / AAMA-accredited laboratories in North America to offer field testing services. Our specialized focus on forensic assessment, diagnostic troubleshooting, and field testing methodology sets us apart in Oregon. We provide precise, independent, and impartial testing data, which is crucial for both new construction and remediation projects. With our expertise and state-of-the-art tools, we ensure your building components meet or exceed performance standards in any environmental condition.

Frequently Asked Questions About Our ASTM Testing Standards

What does it mean to be ASTM-certified testing?
ASTM-certified testing means that QED LAB adheres to nationally recognized standards set by ASTM International to verify the performance, durability, and code compliance of building envelope components. Our accreditation ensures that all testing is performed objectively and consistently, using methods trusted across the construction industry. This gives clients confidence that the test results meet regulatory expectations and industry best practices.
For projects across Oregon, the key ASTM standards include ASTM E283 for air leakage, ASTM E330 for structural integrity under wind loads, ASTM E331 and E547 for water penetration resistance, and ASTM E2357 for evaluating air barrier assemblies. These standards are often cited in building codes and are crucial for meeting energy efficiency and durability requirements in Oregon’s varied climate.
Yes, QED LAB specializes in both laboratory and field ASTM testing throughout Oregon. Our mobile lab vans are fully equipped with state-of-the-art equipment, allowing us to provide reliable testing directly at your project site. This helps streamline the testing process and ensures accurate results under real-world conditions.
While requirements can vary by jurisdiction, many cities and counties in Oregon require ASTM testing as part of the building permit and inspection process. ASTM testing verifies compliance with performance standards for air and water infiltration, structural strength, and thermal performance in Oregon. This is critical for both safety and energy codes.
Our experienced team will review your project specifications and jurisdictional requirements to determine exactly which ASTM tests are applicable. We work directly with your design and construction teams to ensure full compliance and timely results.

Frequently Asked Questions About ABAA T0002 Testing

What is ABAA T0002 testing, and why is it important in Oregon?
ABAA T0002 testing evaluates the integrity and effectiveness of air barrier systems in buildings. In Oregon, this testing is especially important due to the region’s varied climate and moisture conditions, helping prevent issues like air leakage, mold, moisture intrusion, and energy inefficiency.
Yes, QED LAB offers onsite ABAA T0002 testing throughout Oregon, providing convenient, accurate evaluations directly at your construction site.
ABAA T0002 testing is generally completed within one to two days, depending on project size, complexity, and accessibility.
Architects, contractors, building owners, and energy consultants in Oregon typically request ABAA T0002 testing to ensure compliance with building codes, energy-efficiency standards, and to enhance overall building performance and longevity.
Yes, ABAA T0002 testing performed by QED LAB helps demonstrate compliance with Oregon’s energy-efficiency standards and building code requirements, providing documentation that air barrier systems meet industry-accepted performance criteria.

Frequently Asked Questions About Our AAMA Testing Standards

Why is AAMA testing important for my project in Oregon?
AAMA testing ensures your fenestration products, such as windows, doors, and skylights, comply with Oregon’s stringent building codes and perform reliably under our region’s challenging weather conditions like rain, wind, and seismic activity.
Yes, QED LAB provides both laboratory and onsite AAMA testing throughout Oregon, allowing us to assess products directly at your project location for convenience and timely results.
Before testing begins, ensure your products are manufactured to your exact specifications and are properly installed or prepared according to industry standards. We can provide specific preparation guidelines and support to help streamline the testing process and achieve accurate, reliable results.
Yes, as an FGIA-accredited lab, QED LAB’s AAMA testing results are fully recognized and accepted nationally and internationally, providing credibility and assurance for your products worldwide.
QED LAB specializes in providing accurate and comprehensive testing services. While we do not issue product certifications directly, our testing results are essential documentation for manufacturers pursuing official AAMA product certification.

Frequently Asked Questions About ASTM E283 Testing

What does it mean to be ASTM-certified testing?
ASTM E283 measures the rate of air leakage through windows, doors, skylights, curtain walls, and other building envelope components under controlled pressure differences, determining their airtightness and overall performance.
The testing process typically takes between one and two hours per product or assembly, depending on complexity, installation preparation, and the specifics of the product being tested.
ASTM E283 testing helps ensure fenestration products meet building codes and energy-efficiency requirements, reducing air leakage, improving occupant comfort, and enhancing overall building durability and performance.
Yes, proper installation and preparation of the test specimen according to manufacturer instructions and industry guidelines are essential to ensure accurate and meaningful results from ASTM E283 testing.
Yes, ASTM E283 testing can be performed onsite at your project location, providing convenient, timely evaluation of installed building envelope systems and fenestration products.

Frequently Asked Questions About ASTM E330 in Oregon?

Are there specific Oregon building codes that require ASTM E330 testing?
Yes, Oregon’s building codes reference ASTM E330 for assessing the structural performance of exterior window and door assemblies. For instance, the Oregon Structural Specialty Code mandates that these assemblies be tested in accordance with ASTM E330 to ensure they meet required performance standards.
Conducting ASTM E330 testing verifies that your building components can endure the wind pressures typical in Oregon’s varied climate. This ensures compliance with local building codes, enhances the safety and durability of the structure, and may prevent costly repairs or failures due to inadequate structural performance.​
ASTM E330 testing is typically conducted in a controlled laboratory environment to accurately simulate uniform static air pressure differences and obtain precise measurements. However, certain aspects of structural performance evaluation can sometimes be performed on-site, depending on the project’s requirements and testing facilities available.​
When selecting a testing service, ensure they are accredited and experienced in performing ASTM E330 testing. Look for certifications from recognized bodies and verify their familiarity with Oregon’s building codes and environmental conditions to ensure accurate and compliant testing results.
If your product does not meet ASTM E330 standards during testing, QED LAB will provide detailed reports identifying the specific issues and potential weaknesses. This information helps you make targeted adjustments or improvements to ensure your product meets required structural performance criteria and complies with Oregon’s building codes.

Frequently Asked Questions About ASTM E331 in Oregon

Do Oregon building codes specifically require ASTM E331 testing?
Yes, Oregon building codes often reference ASTM E331 as a critical standard for verifying resistance to water penetration. Compliance ensures your project meets local regulations, providing greater confidence in building durability and occupant comfort.
Oregon experiences significant rainfall and wind-driven weather, making ASTM E331 testing essential to ensure building components are effectively protecting against water intrusion, enhancing durability and reducing moisture-related risks.
The actual testing typically lasts one to two hours per product, depending on complexity, preparation time, and specific requirements. Complete results and reporting usually follow shortly thereafter.
Yes, ASTM E331 testing can be performed both on-site and in the laboratory. On-site testing allows evaluation of installed products under actual field conditions, ensuring convenience and accuracy.
If your product does not pass the ASTM E331 test, QED LAB provides detailed analysis and recommendations to help identify areas of water infiltration, allowing you to implement targeted improvements for future compliance.

Frequently Asked Questions About ASTM E547-16 in Oregon

How long does ASTM E547-16 testing usually take?
Testing typically lasts between one and two hours per specimen, depending on the complexity and preparation required. Complete results and reporting are generally provided shortly after testing.
Yes, QED LAB can perform ASTM E547-16 testing onsite, providing convenient and accurate assessments of installed products in real-world conditions at your project location.
If your product does not initially pass testing, our detailed reports will clearly identify water intrusion points and provide specific recommendations for improvements to help achieve compliance and enhance performance.
While ASTM E547-16 is frequently specified by architects, builders, and manufacturers in Oregon for its reliability and thoroughness, it is often referenced by local building codes or project-specific requirements to ensure adequate protection against water intrusion.
ASTM E547-16 involves cyclic pressure changes to simulate intermittent wind-driven rain conditions, while ASTM E331 uses constant static pressures. Depending on your project’s specific requirements or building code compliance in Oregon, ASTM E547-16 may offer a more rigorous evaluation for water penetration resistance.

Frequently Asked Questions About ASTM 779-10 Testing in Oregon

How long does ASTM E779-10 testing typically take?
Testing usually takes between two and four hours, depending on building size, complexity, preparation required, and accessibility. Comprehensive results and analysis typically follow shortly thereafter.
Yes, ASTM E779-10 testing is suitable for all building types, including residential homes, commercial structures, and industrial facilities, making it versatile for any construction or retrofit project in Oregon.
Prior to testing, ensure all exterior openings, such as windows, doors, and vents, are closed, and HVAC systems are turned off. The testing team will handle additional sealing and preparation to accurately measure the air leakage rates.
If testing identifies excessive air leakage, QED LAB provides detailed reports pinpointing problem areas, along with actionable recommendations for corrective measures to help achieve compliance and improve overall building performance.
While not universally mandated, ASTM E779-10 testing is frequently recommended or referenced by Oregon’s energy efficiency codes and sustainability initiatives to verify compliance and enhance overall building quality and performance.

Frequently Asked Questions About ASTM E783-09 Testing in Oregon

How long does ASTM E783-09 testing typically take?
Testing usually requires one to two hours per product or assembly, depending on complexity, preparation, and specific requirements. A detailed report is typically provided soon after.
Yes, QED LAB performs onsite ASTM E783-09 testing, allowing accurate evaluation of installed fenestration products directly at your project location.
Ensure the product is correctly installed and sealed per manufacturer guidelines. The testing team will assist with additional preparation, such as sealing adjacent openings and temporarily disabling ventilation systems, to ensure accurate results.
If your product does not meet air leakage requirements, QED LAB provides a detailed report clearly identifying leakage points and offering practical recommendations to resolve these issues and achieve compliance.
ASTM E783-09 testing is frequently referenced by Oregon building and energy codes or project specifications, particularly to demonstrate compliance with airtightness and energy-efficiency requirements, although specific requirements may vary by jurisdiction and project.

Frequently Asked Questions About ASTM E987 Testing in Oregon

How long does ASTM E987 testing typically take?
Testing generally takes one to two hours per specimen, depending on complexity and preparation. Results and detailed reports are typically delivered promptly afterward.
Typically, ASTM E987 testing is conducted in a controlled laboratory environment to ensure accurate results, although certain aspects may be performed onsite if conditions permit.
If your product fails the test, QED LAB provides a comprehensive report identifying specific issues and offers recommendations for improvement, helping you achieve compliance upon retesting.
While ASTM E987 testing is not always explicitly mandated, it is frequently specified by Oregon’s building codes, project requirements, or industry standards to ensure the safety and durability of fenestration products.
ASTM E987 testing is commonly performed on windows, doors, and sliding glass panels intended for residential, commercial, or industrial applications to verify that glazing remains secure under typical operating stresses and Oregon’s environmental conditions.

Frequently Asked Questions About ASTM E1186 in Oregon

Which methods does ASTM E1186 testing include?
ASTM E1186 encompasses multiple diagnostic techniques, including infrared thermography, smoke tracer testing, chamber pressurization, and visual inspections, each helping pinpoint specific locations of air leakage.
The testing duration varies based on building size, complexity, and selected methods, but most evaluations can typically be completed within a single day, with detailed reports provided soon afterward.
ASTM E1186 testing is suitable for both new construction and existing buildings in Oregon, providing valuable insights for improving energy efficiency, indoor air quality, and comfort across various building types.
Minimal preparation is required, but ensuring unobstructed access to walls, windows, doors, and HVAC systems helps facilitate accurate testing. QED LAB’s team will assist in any necessary preparations onsite.
ASTM E1186 testing identifies air leakage points precisely, providing clear documentation to demonstrate compliance with Oregon’s energy-efficiency and building-envelope standards, while also guiding targeted improvements for better building performance.

Frequently Asked Questions About ASTM E1827-11 Testing in Oregon

Why is ASTM E1827-11 testing important for buildings in Oregon?
Oregon places significant emphasis on energy efficiency and sustainability. ASTM E1827-11 testing helps identify air leaks to ensure buildings comply with state energy codes. This testing also reduces heating and cooling costs while enhancing occupant comfort.
Testing generally takes around two to four hours, depending on the size and complexity of the building. Results and detailed documentation are usually available shortly thereafter.
Yes! ASTM E1827-11 is suitable for residential, commercial, and institutional buildings, providing comprehensive airtightness assessments.
Preparation typically includes closing windows, exterior doors, and sealing intentional openings. The QED LAB team will guide you through additional necessary preparations onsite to ensure accurate testing conditions.
Absolutely! ASTM E1827-11 testing directly supports compliance with Oregon’s energy-efficiency standards by identifying specific air leakage issues and enabling targeted improvements to meet local regulatory requirements.

Frequently Asked Questions About ASTM E2068-00 Testing in Oregon

How is ASTM E2068-00 testing performed?
During the test, technicians apply controlled forces to the sash or panel of the sliding window or door to measure the breakaway and in-motion forces. This process assesses the product’s ease of operation and compliance with specified performance criteria.
The duration of the test depends on the number and type of products being evaluated but generally takes about one to two hours per unit. Detailed reports are usually provided shortly after testing
Yes, ASTM E2068-00 testing can be performed both in laboratory settings and on-site. On-site testing allows for the evaluation of installed products under actual operating conditions, ensuring they function correctly within the specific building environment.​
If a product does not meet the required operating force standards, a detailed report will identify the areas of non-compliance. Recommendations for adjustments or improvements will be provided to help bring the product into compliance with the necessary standards.​
While not always explicitly mandated, ASTM E2068-00 testing is often referenced in building codes and project specifications in Oregon to ensure that sliding windows and doors are operable and accessible, aligning with the state’s emphasis on safety and usability in building design.

Frequently Asked Questions About ASTM E2128-12 Testing in Oregon

How is ASTM E2128-12 testing conducted?
The process involves reviewing project documents, assessing design concepts, analyzing service history, conducting inspections, performing investigative testing, and detailed analysis to identify the causes of water leakage.​
The duration varies depending on the building’s size and complexity but generally requires several days to complete a thorough assessment and provide detailed findings.​
Yes! This evaluation is applicable to both new constructions and existing structures. This helps to ensure the integrity of building envelopes and prevent future water intrusion issues.​
Owners receive a comprehensive report detailing the sources and causes of water leakage, along with recommendations for remediation to enhance the building’s performance and longevity.​
While not always mandatory, adhering to ASTM E2128-12 is considered a best practice for diagnosing water leakage issues and may be recommended to ensure compliance with Oregon’s building performance standards.

Frequently Asked Questions About ASTM E2178-11 Testing in Oregon

Which types of materials typically require ASTM E2178-11 testing?
Common materials tested include membranes, coatings, foams, sheathing boards, and various barrier films used in air barrier systems.
Testing typically requires one day per set of material samples. Results and comprehensive reporting are usually available within a few days after testing.
ASTM E2178-11 testing is primarily laboratory-based because it requires controlled conditions and specialized equipment to accurately measure material air permeance.
By verifying that building materials meet air permeance criteria, ASTM E2178-11 testing helps builders demonstrate compliance with Oregon’s energy-efficiency codes and ensures construction meets high-performance standards.
If your material fails the testing criteria, QED LAB provides detailed analysis and recommendations to help you select alternate materials or make improvements to achieve compliance.

Frequently Asked Questions About ASTM E2357-11 Testing in Oregon?

How long does ASTM E2357-11 testing typically take?
The duration depends on the size and complexity of the air barrier assembly. Typically, ASTM E2357-11 testing can be completed within one to two days, including preparation, testing, and reporting.
ASTM E2357-11 testing involves applying controlled air pressure differences across an air barrier assembly to measure its resistance to air leakage. This method evaluates the entire system, including materials, joints, seals, and accessories, ensuring overall airtightness.
Yes! ASTM E2357-11 testing is suitable for both residential and commercial structures, ensuring comprehensive evaluation of air barrier systems to meet Oregon’s building code requirements for energy efficiency and airtightness.
Building owners receive detailed information about their air barrier system’s performance, including precise air leakage rates and any identified deficiencies. The test results help owners improve energy efficiency, enhance indoor air quality, and extend the durability of their structures.
While not always explicitly required, ASTM E2357-11 testing is widely recognized and frequently referenced as a best practice for verifying the airtightness of air barrier systems, helping ensure compliance with Oregon’s stringent energy and performance standards.

Frequently Asked Questions About ASTM E3158-18 in Oregon

How long does ASTM E3158-18 testing usually take?
Testing typically requires one to two days, depending on the building’s size, complexity, and preparation requirements. Results and detailed reporting are usually provided shortly afterward.
Prior to testing, intentional openings like windows and doors are closed and sealed. HVAC systems are temporarily disabled, and QED LAB technicians assist in ensuring the building is ready for accurate testing.
Yes! The test accurately identifies leakage pathways, enabling targeted remediation and improving the overall airtightness of the building envelope.
While not always explicitly mandated, ASTM E3158-18 testing is frequently recommended or referenced as a best practice by Oregon’s energy codes and sustainability programs to ensure effective airtightness in large buildings.
If your building does not initially meet the standards, QED LAB provides clear documentation of leakage points along with actionable recommendations, helping you implement effective solutions to achieve compliance.

Frequently Asked Questions About ASTM C1060-11A Testing in Oregon

How long does an ASTM C1060-11A inspection typically take?
Inspections typically last a few hours, depending on the size and complexity of the building. Reports with detailed findings are usually delivered within a few days after testing.
Yes! ASTM C1060-11A testing applies to both new construction and existing structures, allowing for effective evaluation and targeted remediation of insulation issues.
Minimal preparation is needed, though optimal testing conditions involve stable indoor temperatures and access to exterior and interior walls. Technicians will provide specific guidance as needed prior to inspection.
Owners receive clear documentation identifying insulation problems, allowing for precise corrective actions. This improves energy efficiency and reduces heating and cooling costs.
While not always explicitly mandated, ASTM C1060-11A testing is commonly recommended as a best practice in Oregon’s building codes and sustainability guidelines.This ensure effective insulation and compliance with energy efficiency standards.

Frequently Asked Questions About ASTM D4541 Testing in Oregon

What types of coatings typically require ASTM D4541 testing in Oregon?
Commonly tested coatings include paints, epoxy coatings, protective layers, and industrial finishes used on bridges, buildings, pipelines, and other structural surfaces.
Testing usually takes several hours to complete, including surface preparation, adhesive curing, and testing. Comprehensive results and analysis are typically delivered shortly afterward.
Yes! Testing involves pulling the coating from its substrate, resulting in minor localized damage. Technicians carefully select testing locations to minimize impact on the overall structure.
While not universally mandated, ASTM D4541 is frequently specified in Oregon construction projects, especially for critical infrastructure and protective coatings, to ensure durability and performance compliance.
If your coating fails to meet the required adhesion strength, QED LAB provides detailed reports identifying issues clearly and recommending effective corrective actions.

Frequently Asked Questions About ASTM F588-07 Testing in Oregon

How long does ASTM F588-07 testing usually take?
Testing generally takes one day to complete, including setup and evaluation. Detailed reports outlining the results are typically provided within a few days afterward.
Yes! ASTM F588-07 testing may cause damage, as the method applies forces designed to simulate forced entry attempts. Testing is carefully managed to minimize unnecessary damage.
While not universally required, ASTM F588-07 testing is frequently specified for enhanced security in Oregon building projects, especially for properties where security and forced entry resistance are critical considerations.
You should provide window assemblies installed according to manufacturer specifications. QED LAB will manage further preparation, including equipment setup and specific test procedures.
If your product fails to meet the forced entry resistance requirements, QED LAB provides detailed analysis, identifies vulnerabilities, and recommends specific improvements to help achieve compliance in future tests.

Frequently Ask Questions About ASTM F842-12 Testing in Oregon

What types of sliding doors require ASTM F842-12 testing?
ASTM F842-12 applies to residential, commercial, and industrial sliding door systems intended to resist forced entry, excluding glazing impacts.
Testing usually takes one day per assembly, including setup, testing, and documentation. Comprehensive results and reports are typically provided soon afterward.
Yes! Testing may cause some damage because it simulates forced entry attempts. However, the test is carefully conducted to minimize unnecessary or excessive damage.
While not universally mandated, ASTM F842-12 testing is commonly specified in Oregon for buildings where security and forced entry resistance are particularly important.
If your door does not meet the required standards, QED LAB provides clear documentation identifying weaknesses and recommending specific solutions or improvements.

Frequently Asked Questions About AAMA 501.2-19 Testing in Oregon

How long does AAMA 501.2-19 testing typically take?
Testing duration varies depending on building size and complexity but typically can be completed within a few hours. Detailed reports are delivered shortly afterward.
No, the test is non-destructive and carefully performed to simulate realistic rain conditions without causing damage to the building’s envelope systems.
While not universally mandated, it is commonly referenced or required for commercial and institutional projects to verify compliance with Oregon’s building envelope performance standards.
If water leakage occurs during testing, QED LAB provides detailed documentation identifying leakage points and recommendations for corrective actions to ensure compliance.
Minimal preparation is needed; ensure interior access to glazing systems and clear exterior access for testing equipment. QED LAB handles all setup and testing logistics onsite.

Frequently Asked Questions About AAMA 502-12 Testing in Oregon

When should AAMA 502-12 testing be conducted?
Testing is typically performed immediately after installation, during construction, or before building occupancy to ensure fenestration products and installations meet performance standards.
Many local Oregon jurisdictions and project specifications require compliance with AAMA 502-12 to demonstrate adequate weather performance and energy efficiency in commercial buildings.
AAMA 502-12 testing typically takes just a few hours per opening, depending on project size, building accessibility, and the number of fenestration products to be tested.
If a product does not meet the required standards, our team provides detailed diagnostics and recommendations to resolve the issue, after which retesting is conducted to confirm compliance.
At QED LAB, we offer flat-rate pricing for clarity and predictability, with cost determined by project scope, location, and the number of openings tested.

Frequently Asked Questions About AAMA 503-14 Testing in Oregon

Why is AAMA 503-14 testing important in Oregon?
Oregon’s climate has a significant amount of rainfall and moisture exposure. This makes reliable AAMA 503-14 testing essential to ensure glazing systems perform effectively against water intrusion and air leakage.
Testing should ideally be performed shortly after installation of the storefront, curtain wall, or glazing system, typically before project completion and occupancy.
Many Oregon jurisdictions and building specifications require compliance with AAMA 503-14 to confirm that installations meet energy and weather performance standards.
Testing generally takes a few hours per area, depending on accessibility, complexity, and the number of openings involved.
If testing identifies performance issues, our experts provide clear diagnostics and detailed recommendations for correcting problems, followed by retesting to confirm compliance.

Frequently Asked Questions About AAMA 511-08 Testing in Oregon

When should I perform AAMA 511-08 testing?
Typically, AAMA 511-08 testing is conducted after construction is complete or on existing buildings to evaluate ongoing performance and diagnose potential air and water leakage issues.
Testing duration varies based on building size, complexity, and accessibility. Most projects can expect testing to take several hours per test area.
Although not universally mandated, many local jurisdictions and building owners require AAMA 511-08 testing to ensure compliance with performance criteria and to protect investments.
Testing methods typically involve visual inspections, air pressure differentials, water spray testing, and diagnostic evaluations to accurately pinpoint areas of leakage or vulnerability.
If issues arise, QED LAB provides detailed analysis, documentation, and clear recommendations for corrective action. Retesting is often conducted to confirm that repairs have effectively addressed the concerns

Frequently Asked Questions About AAMA 902 Testing in Oregon?

What types of products require AAMA 902 testing?
Any hung-type window system that uses sash balances such as single-hung or double-hung windows should undergo AAMA 902 testing to ensure long-term performance.
The duration depends on the type and quantity of sash balances being tested, but standard testing can often be completed within a few days, followed by detailed reporting.
While not always mandatory, AAMA 902 testing is frequently specified in project documents or by manufacturers to meet quality benchmarks and ensure reliability.
Yes! QED LAB can test both standard and custom sash balance systems to AAMA 902 standards, providing tailored testing protocols and data relevant to your specific product design.
If a sash balance does not meet performance criteria, QED LAB provides a detailed failure analysis and offers recommendations to improve the design or materials to help meet compliance in future testing.

Frequently Asked Questions About AAMA 925 Testing in Oregon.

What types of doors should undergo AAMA 925 testing?
Any side-hinged door system used in residential, commercial, or institutional buildings in Oregon, especially where durability and safety are essential.
Technicians apply specific vertical loads to the lock stile of a door system, simulating real-world scenarios. They evaluate whether the door maintains its structural integrity and remains fully functional after loading.
Typically, the testing process can be completed within a day, including setup and evaluation. Detailed results and reports are generally available within a few business days.
The test may apply stress, potentially causing minimal, localized impacts. However, it’s carefully managed to avoid unnecessary damage while accurately simulating realistic loading conditions.
While not explicitly required for all projects, AAMA 925 testing is frequently referenced by architects, contractors, and building codes particularly in commercial or public buildings.

Frequently Asked Questions About AAMA 1304-02 Testing in Oregon

What types of doors should undergo AAMA 1304-02 testing?
Side-hinged doors used in residential, commercial, institutional, or public buildings—especially those needing heightened security should undergo this forced entry testing.
Testing typically requires one full day, including setup, forced entry simulations, and evaluation. Reports summarizing results are usually delivered shortly afterward.
Yes! Since the testing simulates forced entry attempts, some damage can occur. Tests are carefully controlled to limit damage and provide meaningful results.
While not universally mandated, AAMA 1304-02 testing is frequently referenced or recommended by Oregon’s building codes, especially for facilities where security and safety are primary concerns.
If a door doesn’t meet the required forced-entry resistance, QED LAB provides detailed documentation highlighting vulnerabilities, along with specific recommendations to enhance the door’s security and achieve compliance.

Looking for more information about Building Envelope Testing?

At QED LAB, we offer a Lunch and Learn where we provide valuable insights into code requirements and building envelope testing. Our experts will explain how these tests are performed and meet compliance with building codes. Join us for lunch and learn more about building envelope testing today!

Schedule Today!
©

QED LAB

  • 1049 NW Corporate Dr, Troutdale, OR 97060
  • 503-328-9549
  • Monday - Friday: 8:00AM - 4:30PM

Quick Links

Facebook X-twitter Instagram Linkedin
Copyright QED LAB INC. 2025 | Developed by Jumpstart Business Solutions LLC
Scroll to Top